Struct zx::Stream

source ·
pub struct Stream(/* private fields */);
Expand description

An object representing a Zircon stream.

As essentially a subtype of Handle, it can be freely interconverted.

Implementations§

source§

impl Stream

source

pub fn create( options: StreamOptions, vmo: &Vmo, offset: u64, ) -> Result<Self, Status>

source

pub unsafe fn readv( &self, options: StreamReadOptions, iovecs: &mut [zx_iovec_t], ) -> Result<usize, Status>

Wraps the zx_stream_readv syscall.

§Safety

The caller is responsible for ensuring that the buffers in iovecs point to valid (albeit not necessarily initialized) memory.

source

pub fn read_uninit( &self, options: StreamReadOptions, buffer: &mut [MaybeUninit<u8>], ) -> Result<usize, Status>

Attempts to read buffer.len() bytes from the stream starting at the stream’s current seek offset. Only the number of bytes read from the stream will be initialized in buffer. Returns the number of bytes read from the stream.

See zx_stream_readv.

source

pub fn read_to_vec( &self, options: StreamReadOptions, length: usize, ) -> Result<Vec<u8>, Status>

Attempts to read length bytes from the stream starting at the stream’s current seek offset. Returns the read bytes as a Vec.

See zx_stream_readv.

source

pub unsafe fn readv_at( &self, options: StreamReadOptions, offset: u64, iovecs: &mut [zx_iovec_t], ) -> Result<usize, Status>

Wraps the zx_stream_readv_at syscall.

§Safety

The caller is responsible for ensuring that the buffers in iovecs point to valid (albeit not necessarily initialized) memory.

source

pub fn read_at_uninit( &self, options: StreamReadOptions, offset: u64, buffer: &mut [MaybeUninit<u8>], ) -> Result<usize, Status>

Attempts to read buffer.len() bytes from the stream starting at offset. Only the number of bytes read from the stream will be initialized in buffer. Returns the number of bytes read from the stream.

See zx_stream_readv_at.

source

pub fn read_at_to_vec( &self, options: StreamReadOptions, offset: u64, length: usize, ) -> Result<Vec<u8>, Status>

Attempts to read length bytes from the stream starting at offset. Returns the read bytes as a Vec.

See zx_stream_readv_at.

source

pub fn seek(&self, pos: SeekFrom) -> Result<u64, Status>

source

pub fn writev( &self, options: StreamWriteOptions, iovecs: &[zx_iovec_t], ) -> Result<usize, Status>

Wraps the zx_stream_writev syscall.

source

pub fn write( &self, options: StreamWriteOptions, buffer: &[u8], ) -> Result<usize, Status>

Writes buffer to the stream at the stream’s current seek offset. Returns the number of bytes written.

See zx_stream_writev.

source

pub fn writev_at( &self, options: StreamWriteOptions, offset: u64, iovecs: &[zx_iovec_t], ) -> Result<usize, Status>

Wraps the zx_stream_writev_at syscall.

source

pub fn write_at( &self, options: StreamWriteOptions, offset: u64, buffer: &[u8], ) -> Result<usize, Status>

Writes buffer to the stream at `offset``. Returns the number of bytes written.

See zx_stream_writev_at.

source§

impl Stream

source§

impl Stream

source

pub fn set_mode_append(&self, val: &u8) -> Result<(), Status>

Trait Implementations§

source§

impl AsHandleRef for Stream

source§

fn as_handle_ref(&self) -> HandleRef<'_>

Get a reference to the handle. One important use of such a reference is for object_wait_many.
source§

fn raw_handle(&self) -> zx_handle_t

Interpret the reference as a raw handle (an integer type). Two distinct handles will have different raw values (so it can perhaps be used as a key in a data structure).
source§

fn signal_handle( &self, clear_mask: Signals, set_mask: Signals, ) -> Result<(), Status>

Set and clear userspace-accessible signal bits on an object. Wraps the zx_object_signal syscall.
source§

fn wait_handle( &self, signals: Signals, deadline: MonotonicInstant, ) -> Result<Signals, Status>

Waits on a handle. Wraps the zx_object_wait_one syscall.
source§

fn wait_async_handle( &self, port: &Port, key: u64, signals: Signals, options: WaitAsyncOpts, ) -> Result<(), Status>

Causes packet delivery on the given port when the object changes state and matches signals. zx_object_wait_async syscall.
source§

fn get_name(&self) -> Result<Name, Status>

Get the Property::NAME property for this object. Read more
source§

fn set_name(&self, name: &Name) -> Result<(), Status>

Set the Property::NAME property for this object. Read more
source§

fn basic_info(&self) -> Result<HandleBasicInfo, Status>

Wraps the zx_object_get_info syscall for the ZX_INFO_HANDLE_BASIC topic.
source§

fn count_info(&self) -> Result<HandleCountInfo, Status>

Wraps the zx_object_get_info syscall for the ZX_INFO_HANDLE_COUNT topic.
source§

fn get_koid(&self) -> Result<Koid, Status>

Returns the koid (kernel object ID) for this handle.
source§

impl Debug for Stream

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl From<Handle> for Stream

source§

fn from(handle: Handle) -> Self

Converts to this type from the input type.
source§

impl From<Stream> for Handle

source§

fn from(x: Stream) -> Handle

Converts to this type from the input type.
source§

impl HandleBased for Stream

source§

fn duplicate_handle(&self, rights: Rights) -> Result<Self, Status>

Duplicate a handle, possibly reducing the rights available. Wraps the zx_handle_duplicate syscall.
source§

fn replace_handle(self, rights: Rights) -> Result<Self, Status>

Create a replacement for a handle, possibly reducing the rights available. This invalidates the original handle. Wraps the zx_handle_replace syscall.
source§

fn into_handle(self) -> Handle

Converts the value into its inner handle. Read more
source§

fn into_raw(self) -> zx_handle_t

Converts the handle into it’s raw representation. Read more
source§

fn from_handle(handle: Handle) -> Self

Creates an instance of this type from a handle. Read more
source§

fn into_handle_based<H: HandleBased>(self) -> H

Creates an instance of another handle-based type from this value’s inner handle.
source§

fn from_handle_based<H: HandleBased>(h: H) -> Self

Creates an instance of this type from the inner handle of another handle-based type.
source§

fn is_invalid_handle(&self) -> bool

source§

impl Hash for Stream

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for Stream

source§

fn cmp(&self, other: &Stream) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for Stream

source§

fn eq(&self, other: &Stream) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for Stream

source§

fn partial_cmp(&self, other: &Stream) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Read for Stream

source§

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
source§

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize>

Like read, except that it reads into a slice of buffers. Read more
source§

fn is_read_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)
Determines if this Reader has an efficient read_vectored implementation. Read more
1.0.0 · source§

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf. Read more
1.0.0 · source§

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf. Read more
1.6.0 · source§

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf. Read more
source§

fn read_buf(&mut self, buf: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)
Pull some bytes from this source into the specified buffer. Read more
source§

fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)
Read the exact number of bytes required to fill cursor. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Self
where Self: Sized,

Creates a “by reference” adaptor for this instance of Read. Read more
1.0.0 · source§

fn bytes(self) -> Bytes<Self>
where Self: Sized,

Transforms this Read instance to an Iterator over its bytes. Read more
1.0.0 · source§

fn chain<R>(self, next: R) -> Chain<Self, R>
where R: Read, Self: Sized,

Creates an adapter which will chain this stream with another. Read more
1.0.0 · source§

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Creates an adapter which will read at most limit bytes from it. Read more
source§

impl Seek for Stream

source§

fn seek(&mut self, pos: SeekFrom) -> Result<u64>

Seek to an offset, in bytes, in a stream. Read more
1.55.0 · source§

fn rewind(&mut self) -> Result<(), Error>

Rewind to the beginning of a stream. Read more
source§

fn stream_len(&mut self) -> Result<u64, Error>

🔬This is a nightly-only experimental API. (seek_stream_len)
Returns the length of this stream (in bytes). Read more
1.51.0 · source§

fn stream_position(&mut self) -> Result<u64, Error>

Returns the current seek position from the start of the stream. Read more
1.80.0 · source§

fn seek_relative(&mut self, offset: i64) -> Result<(), Error>

Seeks relative to the current position. Read more
source§

impl Write for Stream

source§

fn write(&mut self, buf: &[u8]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written. Read more
source§

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize>

Like write, except that it writes from a slice of buffers. Read more
source§

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
source§

fn is_write_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)
Determines if this Writer has an efficient write_vectored implementation. Read more
1.0.0 · source§

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this writer. Read more
source§

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<(), Error>

🔬This is a nightly-only experimental API. (write_all_vectored)
Attempts to write multiple buffers into this writer. Read more
1.0.0 · source§

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Self
where Self: Sized,

Creates a “by reference” adapter for this instance of Write. Read more
source§

impl Eq for Stream

source§

impl StructuralPartialEq for Stream

Auto Trait Implementations§

§

impl Freeze for Stream

§

impl RefUnwindSafe for Stream

§

impl Send for Stream

§

impl Sync for Stream

§

impl Unpin for Stream

§

impl UnwindSafe for Stream

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.