Struct WlanTxInfoFlags
pub struct WlanTxInfoFlags(/* private fields */);
Implementations§
§impl WlanTxInfoFlags
impl WlanTxInfoFlags
pub const PROTECTED: WlanTxInfoFlags
pub const PROTECTED: WlanTxInfoFlags
Indicate this packet should be protected.
pub const FAVOR_RELIABILITY: WlanTxInfoFlags
pub const FAVOR_RELIABILITY: WlanTxInfoFlags
For rate control: indicate an important data frame, such as EAPOL, which should be sent reliably rather than fast, and is exempt from rate probing
pub const QOS: WlanTxInfoFlags
pub const QOS: WlanTxInfoFlags
Indicate that this packet should be sent out with QoS header when possible (11n+).
§impl WlanTxInfoFlags
impl WlanTxInfoFlags
pub const fn empty() -> WlanTxInfoFlags
pub const fn empty() -> WlanTxInfoFlags
Get a flags value with all bits unset.
pub const fn all() -> WlanTxInfoFlags
pub const fn all() -> WlanTxInfoFlags
Get a flags value with all known bits set.
pub const fn bits(&self) -> u32
pub const fn bits(&self) -> u32
Get the underlying bits value.
The returned value is exactly the bits set in this flags value.
pub const fn from_bits(bits: u32) -> Option<WlanTxInfoFlags>
pub const fn from_bits(bits: u32) -> Option<WlanTxInfoFlags>
Convert from a bits value.
This method will return None
if any unknown bits are set.
pub const fn from_bits_truncate(bits: u32) -> WlanTxInfoFlags
pub const fn from_bits_truncate(bits: u32) -> WlanTxInfoFlags
Convert from a bits value, unsetting any unknown bits.
pub const fn from_bits_retain(bits: u32) -> WlanTxInfoFlags
pub const fn from_bits_retain(bits: u32) -> WlanTxInfoFlags
Convert from a bits value exactly.
pub fn from_name(name: &str) -> Option<WlanTxInfoFlags>
pub fn from_name(name: &str) -> Option<WlanTxInfoFlags>
Get a flags value with the bits of a flag with the given name set.
This method will return None
if name
is empty or doesn’t
correspond to any named flag.
pub const fn intersects(&self, other: WlanTxInfoFlags) -> bool
pub const fn intersects(&self, other: WlanTxInfoFlags) -> bool
Whether any set bits in a source flags value are also set in a target flags value.
pub const fn contains(&self, other: WlanTxInfoFlags) -> bool
pub const fn contains(&self, other: WlanTxInfoFlags) -> bool
Whether all set bits in a source flags value are also set in a target flags value.
pub fn insert(&mut self, other: WlanTxInfoFlags)
pub fn insert(&mut self, other: WlanTxInfoFlags)
The bitwise or (|
) of the bits in two flags values.
pub fn remove(&mut self, other: WlanTxInfoFlags)
pub fn remove(&mut self, other: WlanTxInfoFlags)
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
remove
won’t truncate other
, but the !
operator will.
pub fn toggle(&mut self, other: WlanTxInfoFlags)
pub fn toggle(&mut self, other: WlanTxInfoFlags)
The bitwise exclusive-or (^
) of the bits in two flags values.
pub fn set(&mut self, other: WlanTxInfoFlags, value: bool)
pub fn set(&mut self, other: WlanTxInfoFlags, value: bool)
Call insert
when value
is true
or remove
when value
is false
.
pub const fn intersection(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
pub const fn intersection(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
The bitwise and (&
) of the bits in two flags values.
pub const fn union(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
pub const fn union(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
The bitwise or (|
) of the bits in two flags values.
pub const fn difference(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
pub const fn difference(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
difference
won’t truncate other
, but the !
operator will.
pub const fn symmetric_difference(
self,
other: WlanTxInfoFlags,
) -> WlanTxInfoFlags
pub const fn symmetric_difference( self, other: WlanTxInfoFlags, ) -> WlanTxInfoFlags
The bitwise exclusive-or (^
) of the bits in two flags values.
pub const fn complement(self) -> WlanTxInfoFlags
pub const fn complement(self) -> WlanTxInfoFlags
The bitwise negation (!
) of the bits in a flags value, truncating the result.
§impl WlanTxInfoFlags
impl WlanTxInfoFlags
pub const fn iter(&self) -> Iter<WlanTxInfoFlags>
pub const fn iter(&self) -> Iter<WlanTxInfoFlags>
Yield a set of contained flags values.
Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.
pub const fn iter_names(&self) -> IterNames<WlanTxInfoFlags>
pub const fn iter_names(&self) -> IterNames<WlanTxInfoFlags>
Yield a set of contained named flags values.
This method is like iter
, except only yields bits in contained named flags.
Any unknown bits, or bits not corresponding to a contained flag will not be yielded.
§impl WlanTxInfoFlags
impl WlanTxInfoFlags
pub fn from_bits_allow_unknown(bits: u32) -> WlanTxInfoFlags
pub fn has_unknown_bits(&self) -> bool
pub fn get_unknown_bits(&self) -> u32
Trait Implementations§
§impl Binary for WlanTxInfoFlags
impl Binary for WlanTxInfoFlags
§impl BitAnd for WlanTxInfoFlags
impl BitAnd for WlanTxInfoFlags
§fn bitand(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
fn bitand(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
The bitwise and (&
) of the bits in two flags values.
§type Output = WlanTxInfoFlags
type Output = WlanTxInfoFlags
&
operator.§impl BitAndAssign for WlanTxInfoFlags
impl BitAndAssign for WlanTxInfoFlags
§fn bitand_assign(&mut self, other: WlanTxInfoFlags)
fn bitand_assign(&mut self, other: WlanTxInfoFlags)
The bitwise and (&
) of the bits in two flags values.
§impl BitOr for WlanTxInfoFlags
impl BitOr for WlanTxInfoFlags
§fn bitor(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
fn bitor(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
The bitwise or (|
) of the bits in two flags values.
§type Output = WlanTxInfoFlags
type Output = WlanTxInfoFlags
|
operator.§impl BitOrAssign for WlanTxInfoFlags
impl BitOrAssign for WlanTxInfoFlags
§fn bitor_assign(&mut self, other: WlanTxInfoFlags)
fn bitor_assign(&mut self, other: WlanTxInfoFlags)
The bitwise or (|
) of the bits in two flags values.
§impl BitXor for WlanTxInfoFlags
impl BitXor for WlanTxInfoFlags
§fn bitxor(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
fn bitxor(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
The bitwise exclusive-or (^
) of the bits in two flags values.
§type Output = WlanTxInfoFlags
type Output = WlanTxInfoFlags
^
operator.§impl BitXorAssign for WlanTxInfoFlags
impl BitXorAssign for WlanTxInfoFlags
§fn bitxor_assign(&mut self, other: WlanTxInfoFlags)
fn bitxor_assign(&mut self, other: WlanTxInfoFlags)
The bitwise exclusive-or (^
) of the bits in two flags values.
§impl Clone for WlanTxInfoFlags
impl Clone for WlanTxInfoFlags
§fn clone(&self) -> WlanTxInfoFlags
fn clone(&self) -> WlanTxInfoFlags
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read more§impl Debug for WlanTxInfoFlags
impl Debug for WlanTxInfoFlags
§impl<D> Decode<WlanTxInfoFlags, D> for WlanTxInfoFlagswhere
D: ResourceDialect,
impl<D> Decode<WlanTxInfoFlags, D> for WlanTxInfoFlagswhere
D: ResourceDialect,
§fn new_empty() -> WlanTxInfoFlags
fn new_empty() -> WlanTxInfoFlags
Self
. The specific value does not matter,
since it will be overwritten by decode
.§impl Default for WlanTxInfoFlags
impl Default for WlanTxInfoFlags
§fn default() -> WlanTxInfoFlags
fn default() -> WlanTxInfoFlags
§impl<D> Encode<WlanTxInfoFlags, D> for WlanTxInfoFlagswhere
D: ResourceDialect,
impl<D> Encode<WlanTxInfoFlags, D> for WlanTxInfoFlagswhere
D: ResourceDialect,
§impl Extend<WlanTxInfoFlags> for WlanTxInfoFlags
impl Extend<WlanTxInfoFlags> for WlanTxInfoFlags
§fn extend<T>(&mut self, iterator: T)where
T: IntoIterator<Item = WlanTxInfoFlags>,
fn extend<T>(&mut self, iterator: T)where
T: IntoIterator<Item = WlanTxInfoFlags>,
The bitwise or (|
) of the bits in each flags value.
Source§fn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)Source§fn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)§impl Flags for WlanTxInfoFlags
impl Flags for WlanTxInfoFlags
§const FLAGS: &'static [Flag<WlanTxInfoFlags>]
const FLAGS: &'static [Flag<WlanTxInfoFlags>]
§fn from_bits_retain(bits: u32) -> WlanTxInfoFlags
fn from_bits_retain(bits: u32) -> WlanTxInfoFlags
§fn contains_unknown_bits(&self) -> bool
fn contains_unknown_bits(&self) -> bool
true
if any unknown bits are set.§fn from_bits_truncate(bits: Self::Bits) -> Self
fn from_bits_truncate(bits: Self::Bits) -> Self
§fn from_name(name: &str) -> Option<Self>
fn from_name(name: &str) -> Option<Self>
§fn iter_names(&self) -> IterNames<Self>
fn iter_names(&self) -> IterNames<Self>
§fn intersects(&self, other: Self) -> boolwhere
Self: Sized,
fn intersects(&self, other: Self) -> boolwhere
Self: Sized,
§fn contains(&self, other: Self) -> boolwhere
Self: Sized,
fn contains(&self, other: Self) -> boolwhere
Self: Sized,
§fn insert(&mut self, other: Self)where
Self: Sized,
fn insert(&mut self, other: Self)where
Self: Sized,
|
) of the bits in two flags values.§fn remove(&mut self, other: Self)where
Self: Sized,
fn remove(&mut self, other: Self)where
Self: Sized,
&!
). Read more§fn toggle(&mut self, other: Self)where
Self: Sized,
fn toggle(&mut self, other: Self)where
Self: Sized,
^
) of the bits in two flags values.§fn set(&mut self, other: Self, value: bool)where
Self: Sized,
fn set(&mut self, other: Self, value: bool)where
Self: Sized,
Flags::insert
] when value
is true
or [Flags::remove
] when value
is false
.§fn intersection(self, other: Self) -> Self
fn intersection(self, other: Self) -> Self
&
) of the bits in two flags values.§fn difference(self, other: Self) -> Self
fn difference(self, other: Self) -> Self
&!
). Read more§fn symmetric_difference(self, other: Self) -> Self
fn symmetric_difference(self, other: Self) -> Self
^
) of the bits in two flags values.§fn complement(self) -> Self
fn complement(self) -> Self
!
) of the bits in a flags value, truncating the result.§impl FromIterator<WlanTxInfoFlags> for WlanTxInfoFlags
impl FromIterator<WlanTxInfoFlags> for WlanTxInfoFlags
§fn from_iter<T>(iterator: T) -> WlanTxInfoFlagswhere
T: IntoIterator<Item = WlanTxInfoFlags>,
fn from_iter<T>(iterator: T) -> WlanTxInfoFlagswhere
T: IntoIterator<Item = WlanTxInfoFlags>,
The bitwise or (|
) of the bits in each flags value.
§impl Hash for WlanTxInfoFlags
impl Hash for WlanTxInfoFlags
§impl IntoIterator for WlanTxInfoFlags
impl IntoIterator for WlanTxInfoFlags
§type Item = WlanTxInfoFlags
type Item = WlanTxInfoFlags
§type IntoIter = Iter<WlanTxInfoFlags>
type IntoIter = Iter<WlanTxInfoFlags>
§fn into_iter(self) -> <WlanTxInfoFlags as IntoIterator>::IntoIter
fn into_iter(self) -> <WlanTxInfoFlags as IntoIterator>::IntoIter
§impl LowerHex for WlanTxInfoFlags
impl LowerHex for WlanTxInfoFlags
§impl Not for WlanTxInfoFlags
impl Not for WlanTxInfoFlags
§fn not(self) -> WlanTxInfoFlags
fn not(self) -> WlanTxInfoFlags
The bitwise negation (!
) of the bits in a flags value, truncating the result.
§type Output = WlanTxInfoFlags
type Output = WlanTxInfoFlags
!
operator.§impl Octal for WlanTxInfoFlags
impl Octal for WlanTxInfoFlags
§impl Ord for WlanTxInfoFlags
impl Ord for WlanTxInfoFlags
§impl PartialEq for WlanTxInfoFlags
impl PartialEq for WlanTxInfoFlags
§impl PartialOrd for WlanTxInfoFlags
impl PartialOrd for WlanTxInfoFlags
§impl Sub for WlanTxInfoFlags
impl Sub for WlanTxInfoFlags
§fn sub(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
fn sub(self, other: WlanTxInfoFlags) -> WlanTxInfoFlags
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
difference
won’t truncate other
, but the !
operator will.
§type Output = WlanTxInfoFlags
type Output = WlanTxInfoFlags
-
operator.§impl SubAssign for WlanTxInfoFlags
impl SubAssign for WlanTxInfoFlags
§fn sub_assign(&mut self, other: WlanTxInfoFlags)
fn sub_assign(&mut self, other: WlanTxInfoFlags)
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
difference
won’t truncate other
, but the !
operator will.
§impl TypeMarker for WlanTxInfoFlags
impl TypeMarker for WlanTxInfoFlags
§type Owned = WlanTxInfoFlags
type Owned = WlanTxInfoFlags
§fn inline_align(_context: Context) -> usize
fn inline_align(_context: Context) -> usize
§fn inline_size(_context: Context) -> usize
fn inline_size(_context: Context) -> usize
inline_align
.§fn encode_is_copy() -> bool
fn encode_is_copy() -> bool
Self::Owned
matches the FIDL wire
format and encoding requires no validation. When true, we can optimize
encoding arrays and vectors of Self::Owned
to a single memcpy. Read more§fn decode_is_copy() -> bool
fn decode_is_copy() -> bool
Self::Owned
matches the FIDL wire
format and decoding requires no validation. When true, we can optimize
decoding arrays and vectors of Self::Owned
to a single memcpy.§impl UpperHex for WlanTxInfoFlags
impl UpperHex for WlanTxInfoFlags
§impl ValueTypeMarker for WlanTxInfoFlags
impl ValueTypeMarker for WlanTxInfoFlags
§type Borrowed<'a> = WlanTxInfoFlags
type Borrowed<'a> = WlanTxInfoFlags
Encode<Self>
type cheaply obtainable from &Self::Owned
. There are three cases: Read more§fn borrow(
value: &<WlanTxInfoFlags as TypeMarker>::Owned,
) -> <WlanTxInfoFlags as ValueTypeMarker>::Borrowed<'_>
fn borrow( value: &<WlanTxInfoFlags as TypeMarker>::Owned, ) -> <WlanTxInfoFlags as ValueTypeMarker>::Borrowed<'_>
&Self::Owned
to Self::Borrowed
.