packet_formats::icmp::ndp::options

Struct PrefixInformation

Source
#[repr(C)]
pub struct PrefixInformation { /* private fields */ }
Expand description

Prefix information that is advertised by a router in Router Advertisements.

See RFC 4861 section 4.6.2.

Implementations§

Source§

impl PrefixInformation

Source

pub fn new( prefix_length: u8, on_link_flag: bool, autonomous_address_configuration_flag: bool, valid_lifetime: u32, preferred_lifetime: u32, prefix: Ipv6Addr, ) -> Self

Create a new PrefixInformation.

Source

pub fn prefix_length(&self) -> u8

The number of leading bits in the prefix that are valid.

Is this prefix on the link?

Returns true if the prefix is on-link. false means that no statement is made about on or off-link properties of the prefix; nodes MUST NOT conclude that an address derived from this prefix is off-link if false.

Source

pub fn autonomous_address_configuration_flag(&self) -> bool

Can this prefix be used for stateless address configuration?

Source

pub fn valid_lifetime(&self) -> Option<NonZeroNdpLifetime>

Get the length of time (relative to the time the packet is sent) that the prefix is valid for the purpose of on-link determination and SLAAC.

None indicates that the prefix has no valid lifetime and should not be considered valid.

Source

pub fn preferred_lifetime(&self) -> Option<NonZeroNdpLifetime>

Get the length of time (relative to the time the packet is sent) that addresses generated from the prefix via SLAAC remains preferred.

None indicates that the prefix has no preferred lifetime and should not be considered preferred.

Source

pub fn prefix(&self) -> &Ipv6Addr

An IPv6 address or a prefix of an IPv6 address.

The number of valid leading bits in this prefix is available from PrefixInformation::prefix_length;

Source

pub fn subnet(&self) -> Result<Subnet<Ipv6Addr>, SubnetError>

Gets the prefix as a Subnet.

Trait Implementations§

Source§

impl Clone for PrefixInformation

Source§

fn clone(&self) -> PrefixInformation

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for PrefixInformation

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl FromBytes for PrefixInformation
where u8: FromBytes, U32: FromBytes, [u8; 4]: FromBytes, Ipv6Addr: FromBytes,

§

fn ref_from_bytes( source: &[u8], ) -> Result<&Self, ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, Infallible>>
where Self: KnownLayout + Immutable,

Interprets the given source as a &Self. Read more
§

fn ref_from_prefix( source: &[u8], ) -> Result<(&Self, &[u8]), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, Infallible>>
where Self: KnownLayout + Immutable,

Interprets the prefix of the given source as a &Self without copying. Read more
§

fn ref_from_suffix( source: &[u8], ) -> Result<(&[u8], &Self), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, Infallible>>
where Self: Immutable + KnownLayout,

Interprets the suffix of the given bytes as a &Self. Read more
§

fn mut_from_bytes( source: &mut [u8], ) -> Result<&mut Self, ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, Infallible>>
where Self: IntoBytes + KnownLayout,

Interprets the given source as a &mut Self. Read more
§

fn mut_from_prefix( source: &mut [u8], ) -> Result<(&mut Self, &mut [u8]), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, Infallible>>
where Self: IntoBytes + KnownLayout,

Interprets the prefix of the given source as a &mut Self without copying. Read more
§

fn mut_from_suffix( source: &mut [u8], ) -> Result<(&mut [u8], &mut Self), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, Infallible>>
where Self: IntoBytes + KnownLayout,

Interprets the suffix of the given source as a &mut Self without copying. Read more
§

fn ref_from_bytes_with_elems( source: &[u8], count: usize, ) -> Result<&Self, ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, Infallible>>
where Self: KnownLayout<PointerMetadata = usize> + Immutable,

Interprets the given source as a &Self with a DST length equal to count. Read more
§

fn ref_from_prefix_with_elems( source: &[u8], count: usize, ) -> Result<(&Self, &[u8]), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, Infallible>>
where Self: KnownLayout<PointerMetadata = usize> + Immutable,

Interprets the prefix of the given source as a DST &Self with length equal to count. Read more
§

fn ref_from_suffix_with_elems( source: &[u8], count: usize, ) -> Result<(&[u8], &Self), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, Infallible>>
where Self: KnownLayout<PointerMetadata = usize> + Immutable,

Interprets the suffix of the given source as a DST &Self with length equal to count. Read more
§

fn mut_from_bytes_with_elems( source: &mut [u8], count: usize, ) -> Result<&mut Self, ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, Infallible>>
where Self: IntoBytes + KnownLayout<PointerMetadata = usize> + Immutable,

Interprets the given source as a &mut Self with a DST length equal to count. Read more
§

fn mut_from_prefix_with_elems( source: &mut [u8], count: usize, ) -> Result<(&mut Self, &mut [u8]), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, Infallible>>
where Self: IntoBytes + KnownLayout<PointerMetadata = usize>,

Interprets the prefix of the given source as a &mut Self with DST length equal to count. Read more
§

fn mut_from_suffix_with_elems( source: &mut [u8], count: usize, ) -> Result<(&mut [u8], &mut Self), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, Infallible>>
where Self: IntoBytes + KnownLayout<PointerMetadata = usize>,

Interprets the suffix of the given source as a &mut Self with DST length equal to count. Read more
§

fn read_from_bytes(source: &[u8]) -> Result<Self, SizeError<&[u8], Self>>
where Self: Sized,

Reads a copy of Self from the given source. Read more
§

fn read_from_prefix( source: &[u8], ) -> Result<(Self, &[u8]), SizeError<&[u8], Self>>
where Self: Sized,

Reads a copy of Self from the prefix of the given source. Read more
§

fn read_from_suffix( source: &[u8], ) -> Result<(&[u8], Self), SizeError<&[u8], Self>>
where Self: Sized,

Reads a copy of Self from the suffix of the given source. Read more
Source§

impl FromZeros for PrefixInformation
where u8: FromZeros, U32: FromZeros, [u8; 4]: FromZeros, Ipv6Addr: FromZeros,

§

fn zero(&mut self)

Overwrites self with zeros. Read more
§

fn new_zeroed() -> Self
where Self: Sized,

Creates an instance of Self from zeroed bytes. Read more
Source§

impl IntoBytes for PrefixInformation
where u8: IntoBytes, U32: IntoBytes, [u8; 4]: IntoBytes, Ipv6Addr: IntoBytes, (): PaddingFree<PrefixInformation, { _ }>,

§

fn as_bytes(&self) -> &[u8]
where Self: Immutable,

Gets the bytes of this value. Read more
§

fn as_mut_bytes(&mut self) -> &mut [u8]
where Self: FromBytes,

Gets the bytes of this value mutably. Read more
§

fn write_to(&self, dst: &mut [u8]) -> Result<(), SizeError<&Self, &mut [u8]>>
where Self: Immutable,

Writes a copy of self to dst. Read more
§

fn write_to_prefix( &self, dst: &mut [u8], ) -> Result<(), SizeError<&Self, &mut [u8]>>
where Self: Immutable,

Writes a copy of self to the prefix of dst. Read more
§

fn write_to_suffix( &self, dst: &mut [u8], ) -> Result<(), SizeError<&Self, &mut [u8]>>
where Self: Immutable,

Writes a copy of self to the suffix of dst. Read more
Source§

impl KnownLayout for PrefixInformation
where Ipv6Addr: KnownLayout,

Source§

type PointerMetadata = <Ipv6Addr as KnownLayout>::PointerMetadata

The type of metadata stored in a pointer to Self. Read more
Source§

impl PartialEq for PrefixInformation

Source§

fn eq(&self, other: &PrefixInformation) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl TryFromBytes for PrefixInformation
where u8: TryFromBytes, U32: TryFromBytes, [u8; 4]: TryFromBytes, Ipv6Addr: TryFromBytes,

§

fn try_ref_from_bytes( source: &[u8], ) -> Result<&Self, ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>
where Self: KnownLayout + Immutable,

Attempts to interpret the given source as a &Self. Read more
§

fn try_ref_from_prefix( source: &[u8], ) -> Result<(&Self, &[u8]), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>
where Self: KnownLayout + Immutable,

Attempts to interpret the prefix of the given source as a &Self. Read more
§

fn try_ref_from_suffix( source: &[u8], ) -> Result<(&[u8], &Self), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>
where Self: KnownLayout + Immutable,

Attempts to interpret the suffix of the given source as a &Self. Read more
§

fn try_mut_from_bytes( bytes: &mut [u8], ) -> Result<&mut Self, ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, ValidityError<&mut [u8], Self>>>
where Self: KnownLayout,

Attempts to interpret the given source as a &mut Self without copying. Read more
§

fn try_mut_from_prefix( source: &mut [u8], ) -> Result<(&mut Self, &mut [u8]), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, ValidityError<&mut [u8], Self>>>
where Self: KnownLayout,

Attempts to interpret the prefix of the given source as a &mut Self. Read more
§

fn try_mut_from_suffix( source: &mut [u8], ) -> Result<(&mut [u8], &mut Self), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, ValidityError<&mut [u8], Self>>>
where Self: KnownLayout,

Attempts to interpret the suffix of the given source as a &mut Self. Read more
§

fn try_ref_from_bytes_with_elems( source: &[u8], count: usize, ) -> Result<&Self, ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>
where Self: KnownLayout<PointerMetadata = usize> + Immutable,

Attempts to interpret the given source as a &Self with a DST length equal to count. Read more
§

fn try_ref_from_prefix_with_elems( source: &[u8], count: usize, ) -> Result<(&Self, &[u8]), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>
where Self: KnownLayout<PointerMetadata = usize> + Immutable,

Attempts to interpret the prefix of the given source as a &Self with a DST length equal to count. Read more
§

fn try_ref_from_suffix_with_elems( source: &[u8], count: usize, ) -> Result<(&[u8], &Self), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>
where Self: KnownLayout<PointerMetadata = usize> + Immutable,

Attempts to interpret the suffix of the given source as a &Self with a DST length equal to count. Read more
§

fn try_mut_from_bytes_with_elems( source: &mut [u8], count: usize, ) -> Result<&mut Self, ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, ValidityError<&mut [u8], Self>>>
where Self: KnownLayout<PointerMetadata = usize>,

Attempts to interpret the given source as a &mut Self with a DST length equal to count. Read more
§

fn try_mut_from_prefix_with_elems( source: &mut [u8], count: usize, ) -> Result<(&mut Self, &mut [u8]), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, ValidityError<&mut [u8], Self>>>
where Self: KnownLayout<PointerMetadata = usize>,

Attempts to interpret the prefix of the given source as a &mut Self with a DST length equal to count. Read more
§

fn try_mut_from_suffix_with_elems( source: &mut [u8], count: usize, ) -> Result<(&mut [u8], &mut Self), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, ValidityError<&mut [u8], Self>>>
where Self: KnownLayout<PointerMetadata = usize>,

Attempts to interpret the suffix of the given source as a &mut Self with a DST length equal to count. Read more
§

fn try_read_from_bytes( source: &[u8], ) -> Result<Self, ConvertError<Infallible, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>
where Self: Sized,

Attempts to read the given source as a Self. Read more
§

fn try_read_from_prefix( source: &[u8], ) -> Result<(Self, &[u8]), ConvertError<Infallible, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>
where Self: Sized,

Attempts to read a Self from the prefix of the given source. Read more
§

fn try_read_from_suffix( source: &[u8], ) -> Result<(&[u8], Self), ConvertError<Infallible, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>
where Self: Sized,

Attempts to read a Self from the suffix of the given source. Read more
Source§

impl Eq for PrefixInformation

Source§

impl Immutable for PrefixInformation
where u8: Immutable, U32: Immutable, [u8; 4]: Immutable, Ipv6Addr: Immutable,

Source§

impl StructuralPartialEq for PrefixInformation

Source§

impl Unaligned for PrefixInformation
where u8: Unaligned, U32: Unaligned, [u8; 4]: Unaligned, Ipv6Addr: Unaligned,

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.