template <>

class NaturalSyncClientImpl

Defined at line 1066 of file fidling/gen/sdk/fidl/fuchsia.hardware.pci/fuchsia.hardware.pci/cpp/fidl/fuchsia.hardware.pci/cpp/natural_messaging.h

Public Methods

::fidl::Result< ::fuchsia_hardware_pci::Device::GetDeviceInfo> GetDeviceInfo ()

Returns a structure containing device information from the configuration header.

::fidl::Result< ::fuchsia_hardware_pci::Device::GetBar> GetBar (const ::fidl::Request< ::fuchsia_hardware_pci::Device::GetBar> & request)

Retrieves information for a specified Base Address Register (BAR). If the BAR contains

MSI-X capability tables then an attempt will be made to return an MMIO region excluding

those tables, if possible. Otherwise, an error will be returned.

Parameters:

|bar_id|: The id of the BAR being requested. Valid range is [0, 6).

Errors:

|ZX_ERR_ACCESS_DENIED|: The specified BAR does not have a driver-accessible region due to

the presence of MSI-X tables. To use MSI-X see the |SetInterruptMode| method.

|ZX_ERR_INTERNAL|: A bus driver error has occurred.

|ZX_ERR_INVALID_ARGS|: The |bar_id| specified is outside of the acceptable range.

|ZX_ERR_NOT_FOUND|: The specified |bar_id| does not exist for this device.

::fidl::Result< ::fuchsia_hardware_pci::Device::SetBusMastering> SetBusMastering (const ::fidl::Request< ::fuchsia_hardware_pci::Device::SetBusMastering> & request)

Enables or disables the bus mastering capability for the device.

Parameters:

|enable|: true to enable bus mastering, false to disable.

Errors:

|ZX_ERR_BAD_STATE|: Method was called while the device is disabled.

::fidl::Result< ::fuchsia_hardware_pci::Device::ResetDevice> ResetDevice ()

Initiates a function level reset for the device. This is a synchronous

operation that will not return ontil the reset is complete. Interrupt

operation of the device must be disabled before initiating a reset.

Errors:

|ZX_ERR_BAD_STATE|: Interrupts were not disabled before calling |ResetDevice|.

|ZX_ERR_NOT_SUPPORTED|: The device does not support reset.

|ZX_ERR_TIMED_OUT|: The device did not complete its reset in the

expected amount of time and is presumed to no longer be operating

properly.

::fidl::Result< ::fuchsia_hardware_pci::Device::AckInterrupt> AckInterrupt ()

Alerts the bus driver to deassert the raised legacy interrupt so that it

may be waited on again. Only used if |SetInterruptMode| was called with

|PCI_INTERRUPT_MODE_LEGACY|.

Errors:

|ZX_ERR_BAD_STATE|: device is not configured to use the Legacy interrupt mode.

::fidl::Result< ::fuchsia_hardware_pci::Device::MapInterrupt> MapInterrupt (const ::fidl::Request< ::fuchsia_hardware_pci::Device::MapInterrupt> & request)

Maps a device's interrupt to a zx:interrupt. The device's interrupt mode

must already be configured with |SetInterruptMode|, and |which_irq| must

be >= to the number of interrupts reported for that interrupt mode by

|GetInterruptModes|. A Legacy interrupt may be mapped multiple times,

but the handles will point to the same interrupt object. MSI

MSI-X

interrupts may only have one outstanding mapping at a time per

interrupt. Outstanding MSI

MSI-X interrupt handles must be closed

before attempting to change the interrupt mode in a subsequent call to

|SetInterruptMode|.

Parameters:

|which_irq|: The id of the interrupt to map.

Errors:

|ZX_ERR_ALREADY_BOUND|: The interrupt specified by |which_irq| is

already mapped to a valid handle.

|ZX_ERR_BAD_STATE|: interrupts are currently disabled for the device.

|ZX_ERR_INVALID_ARGS|: |which_irq| is invalid for the mode.

::fidl::Result< ::fuchsia_hardware_pci::Device::GetInterruptModes> GetInterruptModes ()

Returns the supported interrupt modes for a device.

::fidl::Result< ::fuchsia_hardware_pci::Device::SetInterruptMode> SetInterruptMode (const ::fidl::Request< ::fuchsia_hardware_pci::Device::SetInterruptMode> & request)

Configures the interrupt mode for a device. When changing from one

interrupt mode to another the driver must ensure existing interrupt

handles are closed beforehand.

Parameters:

|mode|: The |InterruptMode| to request from the bus driver.

|requested_irq_count|: The number of interrupts requested.

Errors:

|ZX_ERR_BAD_STATE|: The driver attempted to change interrupt mode while

existing handles to mapped MSIs exist.

|ZX_ERR_INVALID_ARGS|: |requested_irq_count| is 0.

|ZX_ERR_NOT_SUPPORTED|: The provided |mode| is not supported, or invalid.

::fidl::Result< ::fuchsia_hardware_pci::Device::ReadConfig8> ReadConfig8 (const ::fidl::Request< ::fuchsia_hardware_pci::Device::ReadConfig8> & request)

Reads a byte from the device's configuration space. |Offset| must be

within [0x0, 0xFF] if PCI, or [0x0, 0xFFF) if PCIe. In most cases a

device will be PCIe.

Parameters:

|offset|: The offset into the device's configuration space to read.

Errors:

|ZX_ERR_OUT_OF_RANGE|: |offset| is an invalid address.

::fidl::Result< ::fuchsia_hardware_pci::Device::ReadConfig16> ReadConfig16 (const ::fidl::Request< ::fuchsia_hardware_pci::Device::ReadConfig16> & request)

Reads two bytes from the device's configuration space. |Offset| must be

within [0x0, 0xFE] if PCI, or [0x0, 0xFFE] if PCIe. In most cases a

device will be PCIe.

Parameters:

|offset|: The offset into the device's configuration space to read.

Errors:

|ZX_ERR_OUT_OF_RANGE|: |offset| is an invalid address.

::fidl::Result< ::fuchsia_hardware_pci::Device::ReadConfig32> ReadConfig32 (const ::fidl::Request< ::fuchsia_hardware_pci::Device::ReadConfig32> & request)

Reads four bytes from the device's configuration space. |Offset| must be

within [0x0, 0xFC] if PCI, or [0x0, 0xFFC] if PCIe. In most cases a

device will be PCIe.

Parameters:

|offset|: The offset into the device's configuration space to read.

Errors:

|ZX_ERR_OUT_OF_RANGE|: |offset| is an invalid address.

::fidl::Result< ::fuchsia_hardware_pci::Device::WriteConfig8> WriteConfig8 (const ::fidl::Request< ::fuchsia_hardware_pci::Device::WriteConfig8> & request)

Writes a byte to the device's configuration space. The acceptable

ranges of |offset| for writes are [0x40, 0xFF] if PCI, or [0x40,

0xFFF] if PCIe. For most purposes a device will be PCIe.

Parameters

|offset|: The offset into the device's configuration space to read.

|value|: The value to write.

Errors:

|ZX_ERR_ACCESS_DENIED|: |offset| is within the device's configuration header.

|ZX_ERR_OUT_OF_RANGE|: |offset| is an invalid address.

::fidl::Result< ::fuchsia_hardware_pci::Device::WriteConfig16> WriteConfig16 (const ::fidl::Request< ::fuchsia_hardware_pci::Device::WriteConfig16> & request)

Writes two bytes to the device's configuration space. The acceptable

ranges of |offset| for writes are [0x40, 0xFE] if PCI, or [0x40,

0xFFE] if PCIe. For most purposes a device will be PCIe.

Parameters

|offset|: The offset into the device's configuration space to read.

|value|: The value to write.

Errors:

|ZX_ERR_ACCESS_DENIED|: |offset| is within the device's configuration header.

|ZX_ERR_OUT_OF_RANGE|: |offset| is an invalid address.

::fidl::Result< ::fuchsia_hardware_pci::Device::WriteConfig32> WriteConfig32 (const ::fidl::Request< ::fuchsia_hardware_pci::Device::WriteConfig32> & request)

Writes four bytes to the device's configuration space. The acceptable

ranges of |offset| for writes are [0x40, 0xFC] if PCI, or [0x40,

0xFFC] if PCIe. For most purposes a device will be PCIe.

Parameters

|offset|: The offset into the device's configuration space to read.

|value|: The value to write.

Errors:

|ZX_ERR_ACCESS_DENIED|: |offset| is within the device's configuration header.

|ZX_ERR_OUT_OF_RANGE|: |offset| is an invalid address.

::fidl::Result< ::fuchsia_hardware_pci::Device::GetCapabilities> GetCapabilities (const ::fidl::Request< ::fuchsia_hardware_pci::Device::GetCapabilities> & request)

Returns a vector of offsets in configuration space corresponding to

capabilities matching the provided capability |id|. If no corresponding

match is found then the vector will be empty.

Parameters:

|id|: the capability id to search for.

::fidl::Result< ::fuchsia_hardware_pci::Device::GetExtendedCapabilities> GetExtendedCapabilities (const ::fidl::Request< ::fuchsia_hardware_pci::Device::GetExtendedCapabilities> & request)

Returns a vector of offsets in configuration space corresponding to

extended capabilities matching the provided extended capability |id|.

If no corresponding match is found then the vector will be empty.

Parameters:

|id|: the capability id to search for

::fidl::Result< ::fuchsia_hardware_pci::Device::GetBti> GetBti (const ::fidl::Request< ::fuchsia_hardware_pci::Device::GetBti> & request)

Returns the Bus Transaction Intiator (BTI) at a given index for the device.

Parameters:

|index|: the BTI to request.

Errors:

|ZX_ERR_OUT_OF_RANGE|: |index| was not 0.